sensor its the PRN switch. ill answer for, wont CRANK ! it wont crank even with a good battery (charged) or jump started. 1: bad start 2: bad wires to same. so hot wire the starter small wire, the key
...bad fueling, huge number of tests. check fuel pressure now. confused, try a shop and watch them, learn. run the fault codes as it may be immobiliser cam position sensor crank position sensor ...
cranks but no spark NO SPARK AT all 4 spark plugs? OR ONLY ONE.? check out for crank sensor
start. You must consider timing. If the timing is off it will not fire correctly. There are cam and crank sensors that do the job, they must be checked
would not idle higher than one any ideas or suggestions to what could be the problem? you might want to look into the crank position sensor. it can cause some of the same problems you are experiencing
how to set the timing in my 2004 suzuki forenza? u dont the computer controls it with the crank sensor
crank sensor sensor how would I go about doing that? I replaced my Throttle body and the car won't start because it is not sparking. My machanic thinks it is the Crank sensor that is causing it to not
...changed coil and still no spark suzuki forenza 2006 Basic first check your fuses 2nd you got a check engine get it scan tell me the code if you got a crank sensor trouble code change it it will ...
Question about Suzuki Forenza
...crank with scan tool bingo scan tool tells you why no spark if cranked for 5 seconds, all EFI cars do that. 1989 to today. bad coil pack dead ignitor that drives coil pack (sadly inside ECU in 06) ...
...crank position sensor on 2006 suzuki forenza What is the easiest way to do this? Removal 1) Disconnect the negative battery cable.2) Remove the power steering pump, if equipped. 3) Remove the A/C ...
1,156 questions posted
Usually answered in minutes!
537 Questions
441 Questions
284 Questions
46 Questions
9 Questions