2002 Suzuki Vitara "noise coming engine" Questions

ENGINE NOISE 2007 Grand Vitara commercial 40 K on clock. Has developed whining noise in engine or turbo. Please comment Whining noise usually comes from defective bearings. have the bearings of your ...

noise - rattle that seems to be coming from the top of the engine. This lasts about 10 - 15 seconds. even when the engine is warm a similar noise is heard but less noisy and lasts about 5 seconds. Any

coming from the engine and the a/c ceases to work, the car is a 2000 diesel The clicking sound is the noise from The clutch to make tne compressoor engaged and disengaged with the Pulley to turn so AC

noise. sounds like its coming from the engine.the more exceleration the louder it gets.please help my heart goes out to anyone that buys a French car. what a bad deal that is.... first off never drive

...noise you will be ok if it was in the bottom of engine then i would say you need to get the work done sooner than later as the chances are it would be crank bearings or bottom end piston bearings but ...

...engine turns over but will not start. i have tried the plugs and get a spark there is fuel in the tank It is in the tank, on top of the tank. It must be dropped to access the fuel pump. If You turn ...

coming on at certain times Hi! You replied to a comment I posted here today. Thank you for the reply. My comment now is: I'm planning to go to FL, from Atlanta (about 400 miles) and of course planning

...coming from the engine( 1999 Grand Vitarra) Why? It also has white emission when starting for about 30 sec and when using the heat the cab smells like gas. I really nees this car to be safe and ...

...noise-and-cooling-fan-belt.html------------Chirping sound coming from engine? http://technoanswers.blogspot.in/2012/01/chirping-sound-coming-from-engine.html--------- Vehicle making Clunk Thump Thud ...

...noise coming from engine at low RPM when idling, then short bursts of noise come during acceleration until 2,000 RPM, then smooths out. I first thought this may be a pulley bearing going bad, but ...