2000 Mercury Sable "car front end wobble high" Questions

...car front end wobbles when braking and at higher speed My car front end wobbles when braking at at high speeds changed the brakes but no change what do you think it could be? did you have the front ...

front end shake yes. if the axle is bad and binding it can cause the front end to vibrate because it gets out of balance. BAD WHEEL BEARING,TIRE OUT OF BALANCE OR TIRE HAS A BLISTER OR BUMP, FRONT END

...car feels like gliding It feels like I'm going to lose control and sometimes when I brake coming down hill the front end shakes violently. then will stop truck has been lifted recently replace shocks ...

...wobble. Check the front steering components, look for worn or broken parts. Most common for death wobble are the tie rod ends, idler arm and pitmen arm. look for play along the track bars and check ...

...front of the car up and twist and pull...push and pull the left and right tire....anby wobble or noises...may have bad bushing/ball joints/cv joints. there is a lot of stuff to look for...but this is ...

...front rotor.  The wobble in the hub bearing will make the rotor attached to it wobble too.  The high spots will strike the brake caliper until the caliper retracts to accommodate the high ...

...car, specifically the front end has been vibrating especially the steering wheel whenever I drive over 60 mph. At first I thought it was just because there was ice frozen around the struts and wheel ...

...bar. Still does not help. Have an alignment place check your idler arms & steering links, and tie rods for play, as well as the rest of the front end. that's a dangerous thing to fool around

...front alignment. The violent wobble is castor wobble and indicates negative castor possible from sagging suspension springs. The camber is out at that results in the car following every dip in the ...

...FRONT WHEN MAKING A RIGHT HAND TURN. SOUNDS LIKE ITS COMMING FROM THE WHEEL Hi the first thing you need to check is the brakes if you can jack the car up and put it on stands you need to take the ...