2006 Jeep Liberty "axle" Questions

...lock screw is accessible. Remove lock screw and pinion mate shaft from differential case. Push axle shaft inward and remove axle shaft C-lock from the axle shaft. Remove axle shaft from side

...seal.... i bet, 99% of seals that fail are , the bearing is allowing , out of spec. moving in the axle so when doing all that hard work ? we check this first. do you know all cars have this book, ...

...and the brake drum if it has one . undo the 4 bolts holding the backing plate onto the end of the axle. You may have to remove the diff cover to remove a c clip holding the axle in the diff. pull ...

every time tension is placed on the rear axle it makes a rusty spring noise and i looked under my jeep and found the problem but i do not know what it is called. it sits on top of the axle and looks ...

how to replace rear axle on a jeep liberty just a shaft. or the whole freak'n thing? gears ,axles pig, housing and drums?

could u give me an estimate on how much to replace my front axle on a 2006 jeep liberty 4x4 You can get a rebuilt axle for that for around $100. It' isn't that hard to replace. Or it should be about 1

...LH strut clevis (Refer to 2 - SUSPENSION/ FRONT/CLEVIS BRACKET - REMOVAL) 12. Remove LH front axle (Refer to 3 - DIFFERENTIAL & DRIVELINE/HALF SHAFT - REMOVAL) 13. Remove front axle brace ...

...when in 4wd no year, no joy, sorry !@!!! the car has 2 front tires. with open axles, (you have the LSD option) one tire dies spin, the loosest tire spins.) but if you hold the ...

...reffering to the upper and lower A frames you should jack the vehicle up on the center of the front axle so that both a frames are relaxed, this will help the grease to flow easier. If you cannot ...

replaced-r/l front bearings left axle seal (dealer) vibration at 50mph+ All wheel balanced plus alignment. Better but still vibration at 50+ especially when accelerating ????? If you can feel it in ...