Question about Jeep Grand Cherokee
...error code P0303 changed plugs switched coils and injectors? 3.7 engine double anon posted, and double answered again..... 303 means , weak combustion on #3. that means all factors effecting ...
Question about Jeep Grand Cherokee
need to know how to replace the crankshaft and camshaft sensors on a 1996 jeep cherokee with a 4.0 V6 engine It has a 4.0 V6 engine we need to know where the crankshaft and camshaft sensors are ...
...car work , radio, heater blower, dash lamps all work then the DC power is ok, Head lights work at STALL.? it's not the transmission so its just an engine stall. (RPM was 0, is the big clue ...
...shutting down while driving one day. The truck would slightly jerk, then shut off as if the car was turned off. Also,the brake pedal locks and the gas pedal gets loose. I have gotten three ...
are pending codes.. Meaning the car will have to recheck the errors before it calls it an error and sets the engine light on. They are the same codes as the others just the PD at the end means pending
Question about Jeep Grand Cherokee
error code that says pending on it. I'm wondering how many times does it have to run through before it clears out completely? I have already replaced both the front and rear O-2 sensors so they should
error. I turn off the car and radio and try all over again, but the error message usually stays. What should I do in order to play the radio? Go to the Honda owners link: https://www.ahm-ownerlink.com
Question about Jeep Grand Cherokee
requirements. Tests to pin down problem are too numerous to explain here. A loose wire or bad connection to the crankshaft or camshaft sensor might cause your on/off starting. Read pending error codes
Question about Cars & Trucks
...car last run ;perfectly? last month, last year, or don't know? p0300 means all fail randomly (is the key clue here. there are only 3 causes (engine,spark ,fuel) (bad list) the P030x errors are all , ...
...car is fueled or fuel tank cap is removed with the engine in start position. To delete the codes, remove the key from ignition, remove the battery negative terminal for 5 Seconds or more. Reconnect ...
1,953 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions