2006 Honda Accord "brakes locked theres pressure push" Questions

Ad

Question about Honda Accord

2 Answers

brakes. You can screw the rear caliper pistons back in, by using a needle nose pliers and turning the cross or x notch in a clockwise direction. both caliper pistons will turn the same way. The reason

Ad

Question about Honda Accord

2 Answers

...pressure getting to the right front at all, all other brakes bled and are working. The problem is in the master cylinder. The MC is in effect two cylinders in one, one cylinder for the front brakes ...

Ad

Question about Honda Accord

2 Answers

...brakes you have to remove bolts that secure caliper to its carrier and lift caliper clear then you will see piston has slots? these pistons have to be wound/ rotated backwards into the caliper you ...

Question about Honda Accord

1 Answer

...pressure to apply the brakes and you have to push it almost completely to the floor to get the car to stop. If you push it 1 millimeter further the wheels lock up. There was some fluid on the ground, ...

...brakes gradually get tighter until they lock up. After about 1 hr, they release and then it starts all over again. do you have to release the pressure from the brake line from the bleeder? I had this ...

...applying the parking brake? Try this when applying the parking brake. Many GM parking brake instructions require you to push the regular pedal for pressure which you lock on with the parking

Question about Honda Accord

1 Answer

...push in freely, there is a problem with the mechanical lock-out linkage or electronic switch that releases the button lock. Check under the dash area along the brake pedal arm for anything that ...

...up, they just hit the floor there is no back pressure on your brakes, bleed them, refill with DOT 3 fluid, them bleed the air out of them(this is your problem), them insure to top off the fluid

...BRAKES UNLOCK There may be dirt in the lines or the calipers. When you press the pedal it forces fluid into all 4 brake calipers. If a line has dirt in it, it might get stuck in one of the orifices, ...

Question about Honda Accord

2 Answers

...pressure, and then not allow the piston to retract, as it will not let fluid go back the other way. best way to find out, is to replace that brake hose. Good luck! if you are not getting brake fluid ...

Not finding what you are looking for?
2006 Honda Accord Logo

875 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...