2004 Honda Accord "remove glove box door" Questions

...glove box, disengage damper (rod keeping door from falling) allow door to swing to floor. Pull filter door out of evaporater case. Remove filter, note arrows for air flow. Pretty simple. Once you ...

...remove the glove box. Three screws on the bottom edge. Remove them, then open the glove box door. Three plastic covers along the top edge, remove with something that won't cut them up. Remove screws ...

glove box, everything will spill out :) Look for a black plastic cover with arrows on the sides. Press them both in and pull. The tray holding the filter will slide out. Take old filter out, watch for

glove box allowing it to swing down past the stops. Depending on what kind of stop it has, the stops may have to be removed. To do so you just use slight finger pressure and from the inside of the box

...remove the glove box. Four screws inside the glove box on either side of the box and latch need to be removed. The two screws on the side are hidden under plastic covers which are shown removed. A ...

...Remove the glove box. 2. Remove Glove box FRAME 3. Pull back the carpet and remove the kick panel. Remove the control unit bracket mounting nuts (4). Disconnect the connectors (5) and remove the ...

needs a/c air intake filter replaced supp0sed to replaced at 35000mi can this be done by owner? yes. you will need to remove the glove box to access the a/c filter door.

...glove box, under the steering wheel or if you open the driver side door the corner of the dashboard usually triangular piece of plastic to remove you should have fuse box on left side of ...

...box if you've eliminated fuses and switches as the cause of the problem. Now you have to remove the door panel to get a better look at your window's power source. For the driver's side and ...

...To access the blower motor and resistor, remove the glove box door, its all in that area: You can also check this site, as they have done the repair: ...