2004 Honda Accord "jeep warms sputters" Questions

1999 Jeep Cherokee(4.0-6 cyl)/Starts fine when COLD ,after running awhile starts hard(coughing and sputtering while pumping gas pedal ,then idle catches(reving high until returning to normal idle?Also

...Jeep wrangler 4.0 sputters after it warms up. Runs good when cold. Changed plugs,wires,cap,rotor,air filter,checked vaccum lines. There are many sensors, what do I do next? Try disconnecting the ...

...sputters after start then cleans out untill start again when i start it it starts to spit and sputter and almost stalls, i have to wait for it to warm up before i can drive it. when it warms up it ...

...Jeep cherokee 4.0 sputters after it warms up. Runs good when cold. Changed plugs,wires,cap,rotor,air filter,checked vaccum lines. There are many sensors, what do I do next? the first thing is to scan ...

97 jeep wrangler 2.5 auto, backfire and loss of power on warm day The jeep runs pretty good in the cool of the morning, but drive it a few miles and it starts sputtering and wants to cut out, really ...

Jeep Cherokee 2003 I have had issues with loss of power after driving the vehicle for 10-15 min... so it happens when the engine is warm. It sputters and loses power then comes back to life. sounds ...

1995 jeep grand cherokee barley runs after warmed up? I have a 1995 jeep grand cherokee v8. when i first start it up it runs strong , but after its starts to warm up it will idle fine but start to ...

warms up. Any suggestions of what else to do or what the problem may be????? Check EGR value, clean or replace. Also PCV valve replace it is cheap. I have an 87 Jeep Wrangler 6 cylinder and I have the

jeep warm up because it will run fine for a minute or so then it starts sputtering like it's not getting enough air but after it warms up it's fine,and the check engine light never comes on. check the

...Jeep Cherokee runs great till it warms up, once it warms it seems to sputter and miss easy way to strat is check all your spark plugs.jeeps are also known for the crank positioning sensors going ...