2004 Honda Accord "blend control motor" Questions

Ad

Question about Honda Accord

1 Answer

...blend doors or the A/C control head. Check out the blend door motor to see if it is properly shutting the doors off to the engine compartment. The reason the passenger side is cooler is because it is ...

Ad

Question about Honda Accord

2 Answers

...control blend door problem, the door is moved by a small electric motor, it is stuck in the cold position. Your Air Conditioning Filter (Cabin Air Filter) may need to be replaced.  Plugged with ...

Ad

Question about Honda Accord

1 Answer

...Control Vents - The vents inside your car are controlled by a cable, electrical servo or vacuum servo. If the temperature blend door is not functioning properly it will cause warm air from the heater ...

Blend door for front temp control is stuck in the 'cold' position this winter. Is there a way to manually move and fix the door to get some heat? you have to replace the blend (heat/cold) door motor, ...

...blend door. Movement of the control knob from COOL (Blue) to WARM (Red) causes a corresponding movement on the air temperature blend door and determines the temperature that the system will maintain. ...

...Blend Door Actuator To Remove: Remove the integrated control panel. Remove the right-side lower instrument panel insulator. Lower the glove compartment. If equipped with Electronic Automatic ...

Question about Honda Accord

2 Answers

...control housing removal and installation Remove the auxiliary air distribution blend door actuator screws. Disconnect the auxiliary air distribution blend door actuator connector. To Install: Connect ...

...plugged motor into harness to test changed temp new motor does not operate is there a fuse just for blend door motor system cools and heats if i move blend door with my hand control head is probly ...

...control by motor sometimes my blend doors do not open i understand it may have a motor 1 Possible bad actuator/servo (motor) 2 Possible HVAC control head problem 3 possible 'binding' blend air ...

Question about Honda Accord

3 Answers

control door is not moving. Air conditioning is working fine. the inlet and outlet hoses at the firewall are both hot. The location of the blend motor on my 2005 malibu is on the driver side, near the

Not finding what you are looking for?
2004 Honda Accord Logo

2,046 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...