2003 Chrysler 300M "steering problems" Questions

...steering to go out of alignment technically. Replace it and you should be god to go. Good luck in getting at it though.Many other things, inner and outer tie rod ends, ball joints, bad bushings, etc. ...

...you your stearing wheel is locked, so try this.....When you put the keys in the ignition rock the steering wheel left and right while trying to turn the key....This is a common thing with most ...

...Shut car off this morning and now key will not turn ignition switch You might try turning your steering wheel back and forth and maybe changing your tilt while trying to turn the key. It sounds ...

...problems? Sounds like the serpentine belt is slipping . Most likely you have a bad belt tensioner. Another possibility is your steering pump could be going out. Ball joints and tie rods make clunking ...

...problems now? Sherri, It sounds like your transmission is stuck in "limp in" mode. That is when there is a shifting problem detected in the diognosic modual, it switches to this mode to get you off ...

...stalling. Sometimes it stalls at lights and sometimes it stalls while it's in motion. The power steering freezes during these incidents, so I can't get over the the shoulder. The car is not ...

steering is moving critical wiring to the ECU. It is very unlikely but Double check. I like a bright led flashlight in the dark to inspect wiring. Follow the wiring from the alternator. It may also be

...problems getting the key to turn. I have also tried the spare key. It is in park and the steering wheel is not locked. It takes about 5 minutes of trying and it will finally turn. Help??? sounds like ...

steering linkage problem is my car ok to drive depends whats wrong with it ??

lossed power steering while driving Voltage light came on and then I felt steering tighten up. Parked turned off and restarted still no power steering? Anyone help? sounds like your relay under the ...