2003 Chrysler 300M "p1776 solenoid switch valve latch" Questions

...p1776 is a trans fault which means solenoid switch valve is latched in low/reverse position..solenoid switch valve is located in valve body of transmission,but for 2001-2004 LH vehicles you need ...

...P1776 solenoid switch valve latch in lower position. Don't know what it means but that's what database say's P0700 is what Yadawho said. You most likely have this code because of the 1776 code . Take ...

...P1776..SOLENOID SWITCH VALVE LATCHED IN THE LOW/REVERSE POSITION..YOU NEED TO HAVE SCANNED AGAIN AND HAVE "EVENT DATA" READ.. LOOKING FOR TRS CODE..IF IT READS TR2,YOU NED TO HAVE TRANS SHIFT CABLE ...

...be needed? P0700 is an alert code the p1776 is the actual trouble code. Code p1776 is solenoid switch valve latched in low/reverse position. Valve is located in valve body not solenoid body reploace ...

...p1776 Solenoid pack needs replaced. I twill only get worse.. More codes. P1776- solenoid switch valve latch in lower position Solenoid pack or shifter cable messed up take it in for repair before it ...

...p1776.Solenoid switch valve latched in lr position. Do i need to replace solenoid pack or valve body for this error code? I was told it could be either one depending on the date stamped on the ...

...p1776 is a trans fault which means solenoid switch valve is latched in low/reverse position When engine light comes on both P0700 & P1776 error codes appear. Transmission will not shift into 4th ...

...P1776: Solenoid Switch Valve Latched in Low/Reverse Position. The TCM monitors the L/R solenoid to ensure that the fluid transfer happens. It uses a Pressure switch to verify this. Usually this code ...

P1776 WHAT DOES THIS MEAN solenoid switch valve latched in LR position (this is a transmission issue which may involve replacing the valve body and solenoid pack; on some models there is a TSB on this

I just had my emission test done and I failed the MIL Command Status. The Diagnostic Trouble Code is P1776 Manufacturer Specific Code. What does that mean? solenoid switch valve latched in lr position