2003 Chrysler 300M "fix timing belt" Questions

Ad

Question about Chrysler 300M

1 Answer

...The timing belt, guide pully and water pump should be changed every 75,000 miles on that 3.5L. If it jumpes 4 or more teeth or if the belt snaps this will bend your valves and or destroy your

Ad

...timing is off how can i fix it I just had to replace my water pump and timing belt in my 99 300M and read to align the marks for the TDC and make sure the sprockets were in the right place but i ...

Ad

...fix it. They should be able to diagnose a problem like this relatively quickly. Signs you can look for are white, sweet smelling smoke coming out of the tail pipe. Also check your oil. A milky ...

Question about Chrysler 300M

2 Answers

...way and the other the opposite) this will throw the cam timing out just enough so it will start but will run very bad, unfortunately the only fix for this is to pull the cover back of and do it ...

Question about Chrysler 300M

1 Answer

...timing belt broke while the motor was running you most definitely bent a valve or two if not all of them. The 300M didn't use no contact or lock up valves which would have locked them up out of the ...

...TIMING BELT. If this has not been done, then get it done as soon as possible. If this belt breaks, you can kiss the upper end of your engine good-bye -- and THAT's ALOT of money. Figure the cost ...

...timing belt still over heating 2800.$ later. Have no idea what to do now. You could have a large air bubble in the system. When you flush the system, do you just drain the radiator. Try parking on a ...

Question about Chrysler 300M

1 Answer

...timing belt and tensioner pulley. thought it was good untill on a long trip. Noticed temp goin up no leaks this time, coolant full. doesnt overheat with heater on. Actuated fans with DRB3 and both ...

...timing belt broke. Unfortunately this vehicle was not equiped with no contact valves so if that is the case you will need to have the engine and Head rebuilt. If the crank position sensor can't sense ...

Question about Chrysler 300M

1 Answer

...timing belt as these cars did not come stock with timer belts. You need to get a timing belt and fix it. Just hope that when the belt broke you did not bend any valves as that will be costly to

Not finding what you are looking for?
2003 Chrysler 300M Logo

269 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...