Question about Chrysler 300M
Change rear wheel bearing rear axle pin broke 1997 jeep grand cherokee We when to change rear wheel bearing and the rear axle pin was broken, is there another way to get the axle out to change the ...
Question about Chrysler 300M
wheel bearing 4wd drive light flashes in dash. scan tool says an overtemperature issue after only driving a 1/4 mile.we are aware of magnetic strip in new bearing and installed it correctly. How tight
...and touching or rubbing the body. in the front/middle of vehicle. maybe a pinion bearing? dry u-joint? possible wheel bearing? does it change when the wheels are being turned if so its a wheel ...
...change when put in four-wheel drive. It sounds like it is coming from the front left wheel and makes an oscilating noise. What could this be? SOUNDS LIKE YOU HAVE BAD LF WHEEL BEARING..JACK UP FRONT ...
Question about Jeep Cars & Trucks
...wheel bearing and took out front driveshaft but noise continues, noise increases with speed Also changed rear u joint that was bad Don't worry I'm sure you will get the solution of your problem, just ...
...wheel, jus change pads ithink its the wheel hub bearing, what do you thimk? If the brakes are new check the front wheel bearings ASAP. If they sieze you have massive problems and expensive ones. If ...
Question about Jeep Cars & Trucks
new tires, changed wheel bearing and took out front driveshaft but noise continues Check 2 things. Rear differential oil and transfercase oil. For metal in oil could indicate a broken bearings inside
Question about Chrysler 300M
...Jeep Cherokee 4wd I have changed out the wheel bearings on many a 2wd vehicle b4, just never tackled anything 4wd. I was wondering what are the proper steps in changing out the front wheel hub ...
Question about Chrysler 300M
...jeep liberty 2006.and now it wont go in 2 wheel drive any answers. why wont it drive in 2 wheel after I changed axle bearings on the rear wheel "The Liberty is available with either a part-time ...
...change rear wheel bearings Unless you have a hydraulic press, don't attempt this in your basic garage or driveway. REMOVAL 1. Raise and support the vehicle. 2. Remove the tire and wheel assembly. 3. ...
269 questions posted
Usually answered in minutes!
949 Questions
395 Questions
313 Questions
272 Questions
107 Questions