2002 Chrysler Sebring "tighten drive belt 2000 dodge" Questions

Ad

...tighten them up a little to try and get it to go away. hi this may because the belt which driving AC(all rotating parts) may be touching some part so the this souund may be caused.please check where ...

Ad

...drive belt. Adjusting T-bolt and tighten belt. Remove jack stand from under radiator and install lower radiator cross member support. Reposition transmission cooler and tighten fasteners. Install ...

Ad

Tighten the bolts to 40 ft. lbs. (54 Nm). Accessory drive belt Wiper module Negative battery cable hope this helps let me know if you need more. dc first have to get the serpentine belt off, then take

Question about Chrysler Sebring

2 Answers

tighten. What else could be causing this annoying clicking noise. It does stop from time to time. The bearing in the pulley is a single row ball bearing so you can expect a slight side movement in the

Question about Chrysler Sebring

1 Answer

...tighten the locknut to 17 ft. lbs. (23 Nm). Connect the negative battery cable. 2.0 DOHC Power Steering Pump And A/C Belt Disconnect the negative battery cable. Loosen the tension pulley locknut. ...

Question about Chrysler Sebring

1 Answer

...for freedom of movement. Position pulley on pump. Install screws and tighten to 30 Nm (250 inch lbs.) . Install accessory drive belt. Install right front lower fender shield. Refill Cooling

...2000 Dodge Stratus. When I start car, starts and runs fine. After driving for a few miles, the battery light comes on most of the time. Every once in a while, it doesn't come on. I have also ...

Question about Chrysler Sebring

4 Answers

...tighten the nut. Install and the accessory drive belt and check tension. Connect the negative battery cable. Check the alternator for proper operation. Tensioner must be moved to loosen belt Use a ...

Tighten the crankshaft pulley bolt to 112 ft. lbs. (151 Nm). Install the accessory drive belts and adjust them to the proper tension. Reconnect the negative battery cable. Run the engine and check for

Question about Chrysler Sebring

1 Answer

Tighten attaching bolts to 12 N·m (105 in. lbs.). Connect heater and lower radiator hoses. Install hose clamps. Install generator and attaching bolts. Lower vehicle. Install accessory drive belt.

Not finding what you are looking for?
2002 Chrysler Sebring Logo

1,584 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...