2002 Chrysler Sebring "ignition won 39 lock" Questions

...won't engage There are a number of reasons that is the case: Perhaps the ignition key did not release the transmission lock when you put it in last. Try putting it in and turning it to ignition ...

...won't operate withiot the ignition switch on) There is a junction block to the left of the bottom of the steering column (C8), it contains a 30 amp circuit breaker which has the tan wire going to ...

...won't come out If the ignition normally only locks with the vehicle in park position, then check the switch on the gear lever mechanism is working.If not, then you'll have to jiggle and ...

...ignition lock cylinder... all of the accessories are on... the key won't move to the start engine position, well it does, but won't start the van. the key turns all the way on and all the way ...

...key tumblers and ignition lock cylinder.These cars are known for faulty ignition switches and ignition lock cylinders.Ignition switch gets to hot then it won't start until it cools

...ignition now car won't start stuck the wrong key in ignition. Now the right key won't even turn forward to start car. Make sure your steering wheel isn't locked.  Sometimes a key ...

...ignition key won't turn if the front wheels are turned and the steering wheel lock is forced to one side. If so, turn the steering wheel slightly to take the pressure off the lock and try turning the ...

won't start until cold again Sounds like you might have a faulty ignition switch and ignition lock cylinder.These cars are known for the ignition switches getting hot and then they won't start

...ignition won't lock in place replaced old ignition with new one and the new ignition won't lock in place If the ignition wont lock in place,just redo it but this time you need to realize ...

car won't start, security light constantly blinks. I had a new key made and car still won't crank. The ignition switch and ignition lock cylinder need replaced