2005 Mercury Mountaineer "car sputters reverse check engine" Questions

...sputters like it's going to cut of. The transmission was replaced 1 year ago. Only in reverse? May have a shift solinoid issues or something related to it. You will need an experienced tech to do a ...

...the car has full engine power , and it idles fine , but in drive it sputters and stalls also is using alot of gas.... YOU MUST CHECK IF THE OIL LEVEL IN TRANSMISSION ,THE PROBLEM IS NOT THE ...

...car and put it in reverse and then I put it in drive and it starting spitting and sputtering like it was struggling for fuel then I put it in neutral and I pushed the gas petal all the way to the ...

...sputters and dies when you put it in drive or reverse. idles very sluggish. Most Likely a vacume leak. Check the engine and surrounding engine bay for a loose hose. I would check the mass air sensor, ...

moto Check enging light, brake light, and ABS lights are on and have been for about a year. It also sputters in reverse especially up a grade. What are the trouble codes stored in the engine computer

...reverse and idle only, it dies. Same for low gear forward. Once placed in low, the engine rpms drop from 1,000 to dead. The only exception is that I have no time to rev the engine to keep the rpms ...

to reverse and the engine began to spit and sputter and ultimately turned off. I've done the same thing before and did not have this problem. check the spark plug wire again, yu have 1 or more crossed

...reverse and the engine began to spit and sputter and ultimately turned off. I've done the same thing before and did not have this problem. sounds like you mixed up 2 wires...check the firing order on ...

check engine light stays on, truck sputters taking off from a stop light or from reverse to drive........ dont know if its a vacuum leak or needs a tune up. idle air control needs replaced

...sputters and jerks only when giving a load in drive. this doesnt happen in reverse. and my check engine light isnt on. my buddy tried readind the codes with his coder and it said everything was fine ...