2005 Jeep Wrangler "sensor" Questions

how do I change the oxygen sensor in my 1997 Jeep Wrangler Unplug sensor cable from connector. Use 7/8" Oxygen Sensor socket, available at most auto supply and tool stores for around $10, to remove ...

93 wrangler no spark I replaced the crank sensor 3 times in 3 years it's always started after that. I replaced the crank sensor and it still won't start. Now I'm getting a cam sensor code. I'm worried

Where is the IAT sensor on a 1995 jeep wrangler Hello, The IAT sensor islocated in the front sensor on the intake manifold it has a grey 2 wire plug that is the 4.0.if it's the 2.5,the sensor is in ...

...start intermittently. Codes are P1594, 0320, 0463 & 1391. Do I change the crank senor, cam sensor or fuel filter/regulator?? (this is for others who may be viewing this problem) P1594 = ...

I have 4 oxygen sensors 1 is bad code po431 bank 2 is the upper or lower sensor DESCRIPTION The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the ...

2005 jeep have 4 oxygen sensors 1 bad its 2 bank is it the upper or lower one DESCRIPTION The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the ...

...1900 and 2250 RPM range. If i get on the gas it smooths out and runs fine. ive changed my tbp sensor, mass air flow sensor, map sensor, coil, spark plugs, spark plug wires, rotor button, ...

jeep engine problems running too rich code keeps saying o2 sensor have replaced twice with no improvement has bad odor from exhaust .also replaced catalytic converter.any idea where to look next? ...

...code trouble code po113 will cause limphome ,low power, and mpg bad, and CEL glow. IAT is major sensor on MAP EFI. the IAT reads too high, id bet it's unplugged. or was removed and dropped to the ...

burns to much gas my similar problem on 4 cyl jeep was cured by replacing both O2 sensors and coolant temp sensor (for second time). Also problem seemed to be related to putting too much oil on ...