2005 Jeep Wrangler "replace gear shift knob" Questions

gear shifter thread Can anyone tell me what the thread size is for the shifter knob? I want to replace it with a custom piece but need to know what the thread is. Thanks. They sell adapters that screw

...gear shift knobs, their locking nuts, and both rows of retaining screws. Slide the first dust boot off the gear shifts (soft rubber with metal ring). Then you'll see the next dust boot is almost ...

...gear shift knob and am wondering how to remove the factory one? On my 2000 jetta glx, I had to replace both the shift knob and boot as one. It is built as one unit. You have to pull the boot up over ...

...replace gear shift selector on 1995 BMW 525i? What tools are needed? My gear shift selector knob needs replacing... the button underneath the knob does not come down allowing the shift to lock into ...

gear shift gets stuck and won't shift into other gears.Will put it reverse and then try to put in drive and it gets stuck in reverse. Either the shift knob or the actuator rod under the shift knob has

replace gear shifter knob on s-10 manuel How to remove old gear shift knob Most gear shift knobs are just screwed on. Try turning it anti clockwise if yu can not see any screw holding it

...shift gears. Can I just replace the knob or do I have to replace the whole shifter because the white tube has a small piece broken off? yes you can just replce the knob it will come with the white ...

...gear manually and replace the knob. It worked for a couple of days except I didn't have 1st and 2nd. Now I found first but it wouldn't shift out of that gear. To make a long story short it is in a ...

national self help salvage yard. Hope this helps. If the button does not stay in the gear shift knob...you can replace the knob (with button) only...remove the knob as described above. Hope this helps

gear shift knob need to replace gear shift knob from factory knob Check this link: http://www.andysautosport.com/shift_knobs/dodge_caliber.html