...RESET AND AGAIN COME BACK.P0335 CODE CRANKSHAFT POSITION SENSOR BAD The sensor would need to be tested with a meter. If it is faulty, the engine and - or transmission has to be removed to replace it. ...
...reset. That will take your transmission out of safe mode. But speedometer must work to keep transmission out of safe mode. Input sensor lets transmission know when to change gears. If it gets no ...
transmission behaves normally. What's the purpose of the sensor? Can continued driving without replacement be detrimental? most cadillacs have service intervals programmed into the information display
...15 min to reset the computer ,and ur good to go..car runs like new again..hope this helps ... Marcos U will need to have the transmission rebuilt, once OD starts to slip that is it for the ...
Question about Buick Cars & Trucks
...a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions
...reset the transmission control unit, and is that the problem or do i need a whole new transmission? thanks for your help. you may not need a transmission replacement, just try replacing the sensor of ...
Question about Suzuki Aerio
...transmission shift sensor a and b were bad, I replaced them and reset computer and codes still read the same.. why? Did you inspect the wire harness, wires brittle? How many miles on the trans? Is it ...
...reset the code but it keeps coming back. Before I spend money to replace the unit, I'm told there are three I would like some expert advice. Thank you in advance, Chris. code p 0720 refers to output ...
Question about Cars & Trucks
...reset computer after replacement of the transmission speed sensor . Did the tss set a code or check engine light. If it did then you need to put a scanner on the computer and delete the code. If not ...
165 questions posted
Usually answered in minutes!
455 Questions
135 Questions
64 Questions
48 Questions
28 Questions