2003 Mercury Grand Marquis "whistling back brakes" Questions

...whistling changes when applying brakes it is just your warning indicator letting you know that the pads are getting very thin. You did not give a more detailed description so I hope this helps. Sam ...

...whistling noise on the driver side wheel? When ever i drive up 20-30 mph, thats when it come on? Could anyone tell me what would be actual problem ? Thanks Check the protective backing plate for the ...

...brakes if so If it is more like a "squeal" then the front brake pads are wearing out. If it is a whistle, like air blowing out, it is brake power booster-related. It may be the "boot" under the dash ...

...whistling is not as noticeable now that the grinding has started. What could this be? Rotors? Wheel Bearing? Ball bearing? It's only on the driver's side.There was also a heated rubber smell in the ...

I have Kia 206.5 optiom. When I backup the car make this noise. Is like a high whistle. When I use the breaks the whistle sometimes is a little more high. check your brake protection plat it's ...

...whistling noise Could be a vacuum leak i would pop the hood and see if you can hear or see a hose off or hear a sucking whitling noisegood place to look is at the back of the motor and around the ...

...back to the whistle when applying the brake and occasional grinding noise when coming to slow stop or start. Please help!...this noise is only happening on the front driver wheel A grinding or ...

...whistling sound coming from back wheel area while driving, but not when idle. your back brakes may be bad,they have squealers on them to identify the bad brake pads from the front. that tells you ...

Have HZJ75 Trayback 1997 with a loud whistling noise coming from front driver side when vehicle takes off. Lasts about 5-6 seconds of driving and then disappears. possible that either your brake ...

...whistling. .. what do I do and the disc is not wounded Hi if you are talking about when you brake this happens then you will have to iver put some shims on the brake pads or put some copper-slip on ...