Question about Mercury Grand Marquis
...radio. I have 2, one for the display and one for the output section. It is possible the second of those has blown . To check you will need to access the wiring behind the radio underneath the ...
Took off face plate from radio now radio wont work. Also display on radio won't come on. Car is a 2002 Pontiac Sunfire sounds like the radio face didnt go back on correctly.
...radio display is out 2003 focus Blauput radio display comes and goes out. Started with sreaks after the car had been detailed and now it just goes out until a hot day say 100 out it comes back. Radio ...
...radio face display. Hopefully your radio has a digital face display. Next, push the select knob on your radio to accept the pin code. For more specific details, you’d need to look up the instruction ...
...me know. what we did was take another radio that had no display but the casette worked so we swapped face plates and installed the radio. We had the luxury of having more than one unit. Thanks
Question about Mercury Grand Marquis
...radio display does not work, but radio does.Help? 2003 sunfire radio Light is burned out in radio. You can replace the front face of the radio from a good one with a good light and put on your radio ...
radio, cd and clock display just stopped working one day. Checked the fuses. How do I fix this? If it is a detachable face,make sure the face is on good. If not and you checked the fuses,then you need
...radio in my 1985 jaguar gets power, but I cannot use any of the buttons ot change stations etc and cassette does not work. Also the station does not display either--please advise what tht problem is ...
radio display blank Typically, these radio displays go dark because the surface-mount resistors on the circuit board crack loose from the board after a few thousand operating cycles. How handy are you
Question about Jeep Cars & Trucks
...radio display is blank can I fix this Sure. Pull the radio, take off the metal cover around it. At the face and the bottom of it, there around 20 leads soldered to the board. Use a soldering iron and ...
1,001 questions posted
Usually answered in minutes!
661 Questions
534 Questions
488 Questions
496 Questions
384 Questions