1998 Mercury Mountaineer "hood pull latch release stuck" Questions

...pull the hood release while slapping your hand on the hood or have someone else lift the front edge while you pull on the latch..... should get in... 2000 FORD SUPER DUTY 5.4 HOOD STICKS.YOU CAN HAVE ...

pull the interior hood release have an assistant push down and pull up repeatably/vigorously until hood releases from stuck position. Lube latch and cable before closing hood. Check the attached links

...hood while you pull the release cable, while cable pulled have them lift up on the hood and it should release. Hood is probably released but stuck, latch out of adjustment or hood support rubbers ( ...

...1999 Chevy Prizm is stuck closed. Pulling on the hood release latch inside the car does nothing. How can I manually open the hood? try pushing down on hood while somebody elss pull latch mau be ...

...open? check that the cable is still attached to the latch lever... if not use pliers to pull the cable... sometimes the latch gets stuck... have someone push down on the hood while you pull the

...pull on the hood release in the car. You have one of two problems... 1. Everything is working fine except the rubber bumpers under your hood are set too low and not providing the "spring force" ...

...hood latch to release even when pulled all the way with vigor 3. Rear window wiper stuck in upright position and won't respond to off-on switch Thanks The no heat problem could be a stuck open ...

...hood. Pull the release and have someone hit the hood with there hand in the middle of the hood, by the latch/front. Then adjust the latch upwards. If the cable is broke then go from the bottom and ...

...hood, above where the latch mechanism is located while you pull on the inside latch release. While holding the latch release pulled, have the person pressing down to let go of the hood. SOmetimes to ...

...pull up on the hood (sometimes depending may have to use a thin screwdriver to pry up carefully not to chip the paint). Once open lube the hood latch under the hood with wd-40. Make sure the latch ...