1998 Mercury Mountaineer "change flasher signal turn" Questions

Ad

Question about Mercury Mountaineer

1 Answer

...turn signals or the right side flashers work. Left side is ok. I moved front and back bulbs from left to right, no change. if bulbs okay check fuse is good you got faulty turn switch or bad

Ad

...there should be a flasher in the cab usually on the fuse panel,from what i remember they used to be silver and round but its been many years sense i had to change one i would start with that

Ad

...flashers do signals do not work however flashers do I changed fuse in dash find and change the turn signal flasher. it looks the same as the e-flasher. What does the flasher and e flasher look

...change the flasher http://www.geeksoncars.com/how_4557654_replace-turn-signal-flasher.html Testing and replacing flasher unit HOW TO REPLACE THE TURN SIGNAL FLASHER ON 02 CHRYSLER SEBRING LXI Saturn ...

Question about Mercury Mountaineer

3 Answers

...signal flasher? It has two, one for the hazard and one for the turn signals make sure you replaced right flasher... by turning on turn signal then grab flasher if it is clicking it is the wrong ...

on the hazard lights and look under the dash you will see what turn signal flasher looks like and know which flasher not to change thinking its the right one. look for the signal flasher and change it

Question about Mercury Mountaineer

1 Answer

...like you changed the hazard flasher thinking it was the signal flasher.you need to look for the flasher unit and change it.it should be on the fuse panel or under the dash in the same general

...17, 2007 - Emg. flashers work but L/h and R/h signals dont. ... How do I get that cover. off my steering wheel? ... How to change Flasher Fuse 4 answers. Turn Signal Switch Replacement - ...

Question about Mercury Mountaineer

1 Answer

...turn signals not working? did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong

changed the proper flasher, your vehicle has two of them, one is for hazards and other is for signals. to tell just turn on hazards if the flasher that you change clicks then you changed the wrong one

Not finding what you are looking for?
1998 Mercury Mountaineer Logo

483 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...