1993 Mercury Villager "trasmission mount" Questions

its stalling out wont pick up speed just sputtering theres a hose run from the trasmission cant figure where it goes..or why the van is running rough. that is just a vent hose. it goes no where. ...

why my 2002 Passat 1.8T Sedan.the trasmission has a knock/Jerk when shifting in the first gear. Now I even felt a stronger jerk when the car was gearing down to stop. What could be the issue? Check ...

trasmission makes a jolt when downshifting at 35mph It could be a broken or worn engine or transmissiom mount. Put the van on a lift and check all the mounts for looseness, worn bushings or missing ...

...), or when changing gear , very unnerving , is a Daewoo Nubira 1998 check for a strut mount worn or defective also the front strutt traction bar,see also how the motor and trasmission mount

...mount. Have you changed the trasmission fluid and filter in your jeep lately, if not do so and that just might stop the jerking in your jeep, and if that does not do the trick you will need to have ...

my suspension under my trasmission is broken what is that part called? There is a cross member that holds the transmission up ... and a transmission mount above that...

...mount. what truck yuo have? is it a 4x4 or 2 wheel drive? in the 2wheel drive that would be your control arm surport cross member which also has your steering rack conected on itwhich is closess to ...

...check engine light has also come on. Probaly engine mount. If your trasmission isn't sliding, but your car is making that awful clunking noise, that's what I would expect. need to do software

...with a 4.0L engine) is the crankshaft position sensor. It is mounted on the left side of the trasmission bell housing and looks like the picture

...think i have a bad trasmission mount also.car run fine but at low speed or putting it in gear it shake? the car is a 1998 hyundai elantea GLS Two on motor one front and rear.  One on