1993 Mercury Villager "radiator hose leak" Questions

...down the line then you will have to replace the hose. Remember you will have 4 hose clamps, the ones that hook to the radiator and the ones that hook to the engine. Good luck hope this helped

...hose [email protected] I'am sort of missing something here Was the radiator blocked or replaced as a guess ? The thermostat i understand The heater core by pass i don't,what does that prove ? The shop ...

hose on the radiator where can i find a valve to let it out. its on a 1993 mercury villager 3.0 http://groups.yahoo.com/group/villagerquest/ you just loosen the lower hose clamp and twist the hose and

gasket. Check for a coolant leak in the small hoses under the upper intake, chek the hose from the radiator to the plastic reservoir. go here for more help: http://groups.yahoo.com/group/villagerquest

how do i change coolant hoses for 97 nissan engine power flushed radiator now my coolant leaks i was told the intake had to come for hard too reach hoses I have provide the answer to this already in ...

...leak around the areas: upper and lower radaitor hoses, radiator and radiator cap if equipped, then look under the engine toward the lower front of the motor where the belt meets the lowest pulley ...

...IN COOLENT AND ITS LEAKING STILL Then the heater core itself must be leaking. This core is like a radiator and can be removed and repaired or

radiator fluid leaking from hose underneath vehicle how too fix it I would check the clamp to that hose and if tight go into a parts store and get new radiator hoses and I usually like to do a coolant

Had to replace radiator, also replaced two hoses. now it still seems to be needing anti freeze and is smelling like the motor is running hot still. have not seen any leaks as of yet looked while van ...

left side antifreeze leaking from bottom hose on top of the engine Bad radiator cap Upper radiator hose. Cracked radiator The correct method to ID the source is a radiator pressure test at a shop.