...to get speed back up, than car will be ok for short time and do it again Clean the MAF sensor with carb cleaner first. It's in the air intake tube, spray the tiny wires inside with carb cleaner to ...
1999 mercury villager won't hold idle check idle control solenoid and clean carbon from passages with carb cleaner. go here too. http://groups.yahoo.com/group/villagerquest/
...and it reduces to 55 or 60 quickly possibly fuel pump failing. Also, clean MAF sensor gently with carb cleaner. 2 glass coated wires in air stream.
vehicle idles fine but sputters and wont accelerate hardly at all when i put it in drive and try to go clean MAF sensor first with carb cleaner. go here http://groups.yahoo.com/group/villagerquest/
...that misses while accelerating at low rpm. What are some possible causes? clean MAF sensor with carb cleaner. do not touch the 2 wires you just spray them. ...
...more rpms villager engine starts popping and banging with more rpms clean the MAF sensor first with carb cleaner and a tootbrush gently. Disconnect the battery for 2 hours and drive for 10 miles. go ...
...requiring unusual force to depress the accelerator. You need to clean the throttle body with carb cleaner. The throttle plate is sticking to the throttle bore. See this site for instrutions in ...
and read files. Sounds like fuel pump in tank is bad But, cleean MAF sensor in air intake tube with carb cleaner spray. http://groups.yahoo.com/group/villagerquest
my villager surges a little when going down the raod clean MAF sensor with spray carb cleaner several times. go here for more help. Could be TPS sensor too. http://groups.yahoo.com/group/villagerquest
location of map sensor on 1998 mercury villager van http://groups.yahoo.com/group/villagerquest/ MAF Sensor on air intake tube, clean wires inside with carb cleaner
253 questions posted
Usually answered in minutes!
478 Questions
379 Questions
326 Questions
276 Questions
247 Questions