1999 Lexus ES 300 "bumper" Questions

horn doesnt work after replacing under bumper horn doesnt work after replacing under front bumper on a 1994 lexus es 300 i need to replace something in the steering wheel check and see if ground wire ...

how do i change the fornt fog lights of a lexus is200? from under and behind the front bumper

Trunk tail light not on but bumper tail lights or on. What's wrong The bulbs

how do you remove the rear bumper on Lexus Se300 2002 open the trunk and you'll see the screws when you remove the side covers. also from the outside are screws around the top of the wheel well. you ...

...to leak through the hole from one of the tail light bolts and the other from a bolt that holds the bumper on. Any suggestions on how to stop the leaking? The bumper was replaced after someone hit

...It could also be worn bushings in the control arms or sway bar. It could be a loose body panel ( bumper, etc). There's no easy way to pick out which specific one it is. Hope this

...STOP AND GO THE IDLE IS ROUGH; BUT WHEN I HIT THE ACCELERATOR THE CAR SEEMS SMOOTH; BUT WHEN IAM IN BUMPER TOBUMPER TRAFFIC THE IDLE DROPS AND IT SEEMS IT WANT TO STALL; BUT WHEN I ACCELERATE SPEED ...

what does it mean when the airbag light comes on? Either the sensor in the bumper has lost communication with the airbag module, or the airbag module is bad, or the airbag package itself is damaged ...

...piece before it bolts into the alternator, on the side of the black piece that faces the front bumper (would be facing you if you were standing in front of the car working on it), there is ...