...door handle now the door wont open from the inside the latch doesnt seem to catch likely the rod from the handle to the latch has fallen off or the handle is broken where the rod attaches...you need ...
...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...
not reattached when someone worked on your door. pull the door panel off (partially) and check the handle, follow the rod. If there isn't a rod going to your handle, it should be obvious what is wrong
...door handle and remove screws another screw on door opening handle and you have to disconnect 2 metal pins behind that and look all around the door panel sides and under should have several rivets ...
...door handle, then you need to pry all the grommets out of the hole's they fit into down both sides and across the bottom, the panel then needs to come straight up and off, they make a simple little ...
door handle will not let me open the door????? spray a light lubricating oil into the locking or catch mechanism, you will need to have the door opened already though. WD 40 should work well. I have a
...outside button does nothing to open the door. The vehicle is a 90 4 door jeep cherokee, if that helps. Either the rod came loose from the outside handle, or the clip holding the two together is ...
...handle be independent from the rest of the door panel. It would be much less difficult to re-attach. It seems to be a standard in any other car Ive ever worked on. Has anyone else ever had this ...
351 questions posted
Usually answered in minutes!
1,380 Questions
1,162 Questions
698 Questions
672 Questions
659 Questions