...front rotors and replace them with new ones on a 1995 honda accord the easiest way is to take off the knuckle loosen the four wheel bearing bolts on the backside of the knuckle and leaving the socket ...
...bearing after you're done (noisy on road test). Not the job to do at home, usually an easy 2-3 hours per side if things go bad (book time is 2.2 hrs per side). Use good quality rotors as you don't ...
...front disc rotors , as this year model is hard to remove rotors , please help You must have what they call "trapped rotors" on your car.First thing is to jack the car,remove the wheel,unbolt the axle ...
...front rotors is not a trivial task on this model. However, if your CV joints are clicking or the boots cracked and you plan on keeping the car for another 100k miles then consider replacing: Axle oil ...
...front axle nut is a 36mm torqued to 180ft.lbs. for your info. also wheel torque is 81 ft lbs. replace bearing , disconnect rotor to the battery . look for the wire from the rotor that connect to the ...
...bearing on drum brakes on a honda accord 1999 4 cly First thing to do is jack up the rear end and put wood blocks behind the front wheels for your safety. Next thing is to remove the rear wheel, then ...
...front drive axle (pass. side) and seal on 1998 accord. Is now leaking where shaft goes into tranny. What could be the problem. Did not leak prior this replacement. well, if the seal leaks , it can be ...
Question about Honda Accord
...front wheel vibration after having belts replaced We had a new timing belt, serpentine belts replaced in a 2002 honda accord. now they squeek when you start car and the tires make a vibration when ...
...front of the bearing. I have used 2 small crow bars on each side of the hub and removed it by rocking it back and forth. This is pulling the sealed bearing apart as the hub is pressed onto the inner ...
2,213 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,636 Questions
1,570 Questions
1,470 Questions
