remove and replace both headlight assembly. you will have to remove the front bumper cover to get to 2 bolts and also the grille to get another bolt off also there are are a total of 5 bolts that hold
...the bolts holding the bracket for the bumper. Depending on the model make sure any light are disconnected first. Once the bumper is off you can remove the bumper cover and replace new bumper ...
Question about Oldsmobile Cars & Trucks
remove and replace bumper/driver fender on a 95 aurora fender bender.must replace driver side fender/headlight and front bumpercover you can get the parts at the junk yard and you can do it yourself. ...
...it is not as the front bumper and much more needs to be removed to replace it i would start with compression test. when was the last time you had belt and water pump and timing components replaced
replace the horn on your Kia Amanti, you will need to follow these steps: Disconnect the battery: Before you start working on the horn, disconnect the battery to avoid any electrical accidents. Locate
...Remove the old bulb. Step 7: Insert the new bulb into the headlight assembly, and turn clockwise to lock into place. Be careful not to touch the glass bulb of the new socket. This could degrade ...
remove the radiator cap and fill with coolant till it is visibly full and replace the radiator cap. I had to do this twice but it worked and my car is operating at normal temperature and with the same
...Remove or disconnect the following: NOTEIf it is necessary to replace the hub or bearing, replace the components as an assembly. Rear tire and wheel assembly If equipped with rear disc brakes, the ...
...remove the right front wheel, and splash guard. I also suggest removing the bumper for easier access. You may have the remove the horn assembly to remove the pcm. I ended up bending my because well ...
2,213 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,636 Questions
1,570 Questions
1,470 Questions