Question about Honda Accord
...all the accessories turn back of when the key is returned to the acc position. I replaced the main relay with no change. Ignition switch defective Ignition contacts faulty replace ingnition ...
...Check your ignition switch, replace if necessary. Sometime old ignition switch open the circuit due to poor contact surface then main voltage from battery can't pass through all electronics
...key will not turn anymore and i need it to come out so i can have the ignition rebuilt. any thoughts my car was broken into. i need to i need to replace the ignition switch (cylinder) how can do
...Replace the entire affected SRS harness assembly if it has an open circuit or damaged wiring. IGNITION SWITCH Remove the steering wheel, then remove the steering column covers. Disconnect the 7-P ...
...Check with a Honda dealer to see if your model is part of the recall group & qualifies for replacement. I’m currently on my third ignition switch, this last one I replaced
...thing????? Hi jon, an aftermarket igniter (also called 'ignition control module') should be fine. Replaced mine in my 92 accord last year, let me know it u need any further info or help in the ...
...ignition switch, this last one I replaced myself. I had that problem. I had to replace 2 crack sensor that comes together in my timing belt cover. I didn't have any problems with it anymore. Check ...
...replace ignition contrl module. Where is this located? how hard is it to replace? Hello gijpt8, The ignition control module (ICM ) is inside the distributor see image below. It is fairly easy to ...
Question about Honda Accord
...as part of the reluctor wheel pickup and ignition module. Generally the entire distributor is replaced as a unit for ease and typical distributor bearing
3,891 questions posted
Usually answered in minutes!
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions