1992 Honda Accord "replace gear shift cable" Questions

...replace+gear+cable VTec Solenoid. If it is faulty, it should throw a DTC code https://www.google.com/search?q=2000+honda+accord+2.3+replace+vtec+solenoid ... USA spec car in USA? not told 2.3L inline ...

...shift out of 1st gear. can u help. thanks check the instillation of the transmission shift cable, it needs to be adjusted so that the pawl on the trans case has a full range of motion-put the shifter ...

...shift into 2nd gear. Now the s light is on all the time and it still wont shift into 2nd gear. i checked the codes and it has tcu code 7 for shift control solenoid valve A I visually checked the ...

The gear shift is getting hard to put into gear? The shifter cable must be getting frayed internally. You'll have to get it replaced.

...gear shifter does NOT shwitch from park when you step on break and break lights does not come on when pressed SHIFTER LOCKED IN PLACE Remove the instrument panel cover below the steering column, then ...

...Gear box is stiff when shifting from R to D etc. Thanks for your help This is most ofthe related to lubrication of the cable, end bushings, and linkage at the tranny... especially at this age You may ...

...SHIFT CABLE BROKEN..HOW DO I CHECK THIS PROBLEM. There may be a problem with gear box.. Try replacing it and you may get recovered from this problem. Gear box available with good quality and ...

...gear dosent roll over( as in shift up) I whould jus drive in 4th cuz it's an auto but it makes noises like it's workin to hard when I acc. It almost hesitates. So should I jus replace the tranny.. ...

gear shift in 3rd or 4th/D. When it is shifting erratically the indicator on the dash for D4 - the light will fade or flicker. Or the D4 and D2 will be lit at the same time. Transmission fluild levels

...shift cable housing as they tend to run dry and bind over time as well as get old and just wear out, by dooing this you may notice a need to not replace the cable as the lube of it seems to work and ...