1992 Honda Accord "replace clutch slave cylinder" Questions

Ad

Question about Honda Accord

1 Answer

clutch at bleeder screw on slave cylinder and make sure there is pressure from master cylinder. If there is pressure then slave cylinder may be bad replace slave and bleed and that should take care of

Ad

...replace both the clutch slave and master cylinder clutch slave cylinder is possibly leaking. do a visual check. with help of another person , without vehicle running have other person pump clutch ...

Ad

...replace the Clutch Master Cylinder or the Clutch Slave Cylinder or both? Also, is there somewhere there might be another fluid leak? Thanks for you help. if it,s hydrolic look to put in fluid. ...

Question about Honda Accord

1 Answer

...master cylinder and slave cylinder have not been replace in side 5 years ago , the have them replace by a specialist brake and clutch shop at this point there is nothing wrong with the clutch ...

...by us with the instructions in the shop manual. Be sure to bleed the system after fixing. Inspect and bleed Clutch master and slave cylinders. Replace defective parts. Fill out with new brake

Question about Honda Accord

1 Answer

...clutch slave cylinder I have a 2001 honda accord dx. My clutch slave cylinder was leaking so I replaced it. Now it seems as if i cannot bleed the cylinder. I constantly pump the clutch and bleed the ...

Question about Honda Accord

2 Answers

...clutch slave cylinder I have a 2001 honda accord dx. My clutch slave cylinder was leaking so I replaced it. Now it seems as if i cannot bleed the cylinder. I constantly pump the clutch and bleed the ...

...low or empty you have a leak or component failure. Visually inspect clutch master, line, slave cylinder for fluid leaks. replace as needed. If hydraulics are o.k., suspect clutch disc/pressure

Question about Honda Accord

1 Answer

...replace. fill the clutch reservoir with dot 3 brake fluis and open the bleeder on the slave cylinder until fluid starts to run out. refill the reservoir with fluid and with the help of a friend have ...

...replace the slave cylinder. You are loosing hydraulic pressure in the clutch and is the reason why it is not engaging correctly. YOUR ONLY SOLUTION IS TO REPLACE THE SLAVE CYLINDER AND BLEED THE ...

Not finding what you are looking for?
1992 Honda Accord Logo

3,891 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

1994 Honda Accord
1994 Honda Accord

1,470 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...