1992 Honda Accord "ignition key code located" Questions

Ad

...key ignition on to power up everything but don't engage the starter. Count the amount of times the check engine light flashes. It's like morse code. A solid longer blink indicates the amount of the ...

Ad

ignition switch key light, and your key interlock switch.  If these things are working, the fuse is not blown. I am having the same problem. My horn on't work, my VSA light is on and my car won't

Ad

key in the ignition to on, not accessory but on but don't start the car. you should see an LED light flashing on the ECM below the dash on the passenger side where you pulled back the carpet. If there

key...The Check Engine Light will flash a two digit code...Example ; 5 long flashes folowed by 2 short flashes= code 52...See list below...When you have the code/codes send a comment...Guru...saailer.

Question about Honda Accord

1 Answer

...ignition key to the on position,engine off.This puts the car into diagnostic mode.The "S" light,or gear indicator light on the dash will flash a series of numbers,and these are your codes.You have to ...

...ignition switch on. The S light (or D4 light if your car doesn't have the S light) should start to flash a code. Might be a combination of long and short flashes. A long flash stands for 10, and ...

key. Because you are showing current to several things that draw far fewer amps does not mean that you have sufficient power to cause the solenoid to work or to turn the starter. The fact that it does

Question about Honda Accord

4 Answers

...ignition key on,with engine off,not running.This throws the computer into self diagnostic mode,and the D4 or "s" light will flash a series of flashes.The flashes have to be counted,and written ...

Question about Honda Accord

8 Answers

...key into ignition on, then turn the radio on ( You should see CODE on display), then turn the radio off, push 1 and 6 preset radio stations buttons simultaneosly and hold them while turning the radio ...

...ignition key in off position,jump terminals together at connector with jumper wire,paper clip works fine.With jumper installed turn ignition switch into on position,not start just in run ...

Not finding what you are looking for?
1992 Honda Accord Logo

3,891 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

1994 Honda Accord
1994 Honda Accord

1,470 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...