...terminal to have a bare metal contact. Did you check the bulb socket of the right brake lamp itself? Heat can cause the terminals plastic surface in the socket to be deformed . Check on this
...check fuses first. next time say what dash lamps means. there are a huge number of lamps on the dash warning lights. displays dash parking lamps (back ground glowing for night usage) called dial ...
...check all wires to see which one is for what usage. Have a friend to operate the switches inside while you test each wire and mark the wires with tape for what they are used for. Signal lamps must be ...
Usage 1 Rear Seats 2 Rear Accessory Power Outlet 3 Steering Wheel Controls Back light 4 Driver Door Module 5 Dome Lamps, Driver Side Turn Signal 6 Driver Side Turn Signal, Stop lamp 7 Instrument Panel
Question about Cars & Trucks
lamp dimmers, for back lighting at night.
what lamps fails im not sure. blind.
these truck have huge option variants.
like manual or climate control (or digiit) controls for HVAC
A REAL
Question about Honda Accord
LAMP glowing in cluster, yes, that means its immoblized, the operator guide told you what to do, (yes tow to and ASE shop) why not learn to check battery state of charge. and if not 12.6vdc change it.
Question about Honda Accord
...check oil every other fill-up. if it drops too fast , every fill up same thing since 1884 to now, no changes.. why let quicklub touch your car, why not real ASE mechanics that will not do it wrong or ...
Question about Honda Accord
LAMP" on the fuse block cover and is located under the hood at the right front fender covered with a removable hard plastic protector. This is called the "Fuse block" on page 0-8 of the
Question about Dodge Cars & Trucks
...usage varies and for sure IMMO key , enigine IMMOblizer not happy. and present this car has RUN ASD relay R1 ,drops out of PCM sees spark dead is spark dead? or IMMO key failed. is IMMO lamp unhappy, ...
Question about Cars & Trucks
lamp is used to inform the driver that the AWD system has been disabled and no torque will be applied to the rear wheels during a slip condition. The AWD disable indicator is controlled by the PCM via
3,891 questions posted
Usually answered in minutes!
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
1,470 Questions