2001 Cadillac DeVille "intake manifold bolts" Questions

Ad

Question about Cadillac DeVille

1 Answer

...settings for manifold bolts What are the manifold bolt torque settings for intake manifold on 2000 Cadillac Deville? Check this Caddy link for torque specs. intake manifold torque sequence 10 ...

Ad

...intake manifold. Either way i started the job last night, i am having a hard time pulling out the manifold. I already loosened the clamp but i cant pull it out, is there a trick? Hi!! These are the ...

Ad

Question about Cadillac DeVille

1 Answer

intake manifold, please be as sure as possible that your starter needs replacement. If you have any doubt, please let me know what your symptoms are and what troubleshooting you have done that led you

Question about Cadillac DeVille

1 Answer

...intake manifold must be removed. Refer to the procedure for removing the intake manifold. Reposition the front bank spark plug wires. Remove the air intake duct from the throttle body. Detach the ...

...intake manifold starters are always located next to the big bell housing of the transmission unit. where the gears from the starter can engage the gears of the flywheel. I'm assuming you mean the ...

Intake manifold Cam covers Harmonic balancer Timing chain front cover Oil pump WARNING Align all timing marks before performing the next step. Chain tensioner from the timing chain Cam sprockets NOTE:

Question about Cadillac DeVille

1 Answer

...intake manifold. Remove the thermostat housing. Remove the thermostat and O-ring from the housing. Thermostat installation?4.6L Engine Loosen the upper radiator hose clamp at the thermostat housing ...

...connector at the IAT sensorRemove the MAF SensorRemove the Intake Manifold (tighten the bolt 22 Ib ft.)After remove the intake you will see the starter.let me know if you need more

...intake manifold over your valve covers you need to remove them. once they are off carefully disconnect as many hoses from the covers as you can and try to mark them so you can remember where they go. ...

intake manifold. You have to remove the intake to get to it. It (starter) is held on with two bolts with 10mm heads. and two electrical wires. Disconnect negative battery cable at the battery (battery

Not finding what you are looking for?
2001 Cadillac DeVille Logo

1,816 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...