1993 Subaru Legacy "seat belt" Questions

...seat belt wont lock seat belt in bench seat wont click in place Check to be sure it is the right belt and latch combination. I believe you have 3 seat belts in the rear. The latch for the two side ( ...

how to get seat belt buzzer to quit ringing when not wearing seat belt should be a switch under the seat, disconnect the wire. Or find the buzzer and disconnect it

seat belt I've only had to change a seat belt once, and it was not a Subaru (the belt was partially cut thru). In my vehicle (Jeep) I had to remove the rear seat, and the belt was anchored with a bolt

...seat belt all the way back to the lock in position & unplug the motor, then just use the quick disconnect (red button at the end of the belt). the motor is located at the pillar where the belt ...

...seat belt (across the chest ) replaced because it didn't retract. The new seat belt does not engage (lock up) if you pull it sharply. Is this normal? Do I assume it would only lock up only when one ...

seat belt will not pull out usually inertia reel fault,has a ball that moves and locks if theres sudden movement,or angle,or simply jammed with something,have to pull B pillar (middle pillar with seat

...seat belt jammed Hi I have a 1997 Subaru Legacy 2.5 litre and the front LH side seat belt is jammed. I have spent 1 hour trying to free it, but it is firmly stuck. Any suggestions? Thanks Stuart ...

...seat belt will not work help driverside shoulder belt will not work the body computer runs the belt motor in response to the door open/close plunger switch. Check the instrument closter to see if it ...

...seat belt isn't working - stuck in one position... What do you think it wrong? Do seat belts have lifetime warranty? it probably rewound with a wrinkle or a twist in it. About all you can do is try ...

my 06 liberty 2.0R wagon makes beeping sounds but no warning lights on dash? Weight sensors in the front seats will give a warning sound if you don't have your seat belt on when you reach about 20kmh.