1993 Subaru Legacy "remove water pump" Questions

Remove the water pump retainer bolts. Remove the water pump. To install: Clean the gasket mating surfaces thoroughly. Always use new gaskets during installation. Install the water pump and tighten the

...water pump. * Loosen and remove the bolts in a crisscross pattern from the center outward. * Insert a rag into the block opening and scrape off any remains of the old gasket. WARNING When working on ...

how to change water pump on 93 subaru lagacy how to change the water pump Here's a link to the water pump removal.

...help me? A leak behind the water pump is usually where the pump meets the engine block. It may require a new gasket, but you will have to remove the timing belt covers to get in there and

...Remove the water pump bolts and remove the water pump (it may stick a little, tap side lightly to break seal) while removing water pump the timing belt will loosen just leave it (when you put new ...

...water pump. Your advice on how to remove the pump from the motor will be much appreciated. - Thanks. Kevin Smith - NZ Go to Auto Zone and they well loan you a pressure pump you can attach to the ...

...water to try to remove the blockage. Yhis will be a temporary fix however because the foreign material will be in the coolant system and will eventually plug the core again. If you try this and it ...

...remove the water pipe at the top of the radiator take your garden hose and insert it to the rediator don't force it just hold it there. Start the car let it idle, open the hose pipe. What happens now ...

water with Dawn dishwashing soap). Remove bolts (10mm) securing fuel pump to gas tank and lift out. It may requiring turning to lift out. Average time 1-2hrs if you're working casually. 30 minutes

remove the belts to get to the water pump. I was wondering if there was any other tricks to try before I pay to have the water pump repplaced. (Is there a way to test the water pump before removing it