1993 Subaru Legacy "ignition" Questions

Ad

Question about Subaru Legacy

2 Answers

1990 Subaru Legacy shorted out the ignition coil. I replaced it and in less than 1 mile,it shorted out the new one. Subaru engines (including Legacy and engines of many other automobiles, GM, etc.) ...

Ad

Where is the ignition control module located on a 1990 Subaru legacy 2.2l Center of firewall. It is a black plastic box with 2 screws or e the ignition module could be mounted below the steering ...

Ad

ignition switch spark shorted something II have a 1997 subaru outback and last night while my car boxed in two other cars I broke a key off in my ignition and neither I or a locksmith could get it out

Question about Subaru Legacy

1 Answer

91 Subaru Legacy L+, 2.2 liter, mfi, no turbo, distributorless ignition. Check Engine light on, idles real rough (but runs fine at speed). I can't convince it to give me any flash codes. What is the ...

Question about Subaru Legacy

1 Answer

...Subaru Legacy with no spark 90 Sub Legacy 2.2l that won't start. I checked the timing, replaced the ignition module, crank angle sensor, camshaft sensor, and had the coilpack tested at Autozone ...

...months ago and battery 3 weeks ago. Could it be bad starter or bad terminals? i suspect either the ignition switch is worn out or the starter. test the starter first then the ignition switch. both ...

2miles. I changed out the fuel filter and the fuel pumps,but nothing worked. I have noticed that my ignition switch when i turn it will not start the car on the first try. I also put in a new mass air

Question about Subaru Legacy

1 Answer

...the battery was was connected wrong, something got fried i think, not sure what. I can't get the ignition light on. Check the fuses, they're located under the hood and in most vehicles they are ...

Starter/Ignition Issue: Install a Starter Relay? I have a 1997 Subaru Legacy L wagon automatic, and the starter will not crank once in a while. Symptoms vary between the ignition simply not cranking ...

...wave form. These are the signals coming from the computer. You should also have 2 wires that have a ignition primary wave form. These are the signals that the igniter sends to the 2 coil packs. If ...

Not finding what you are looking for?
1993 Subaru Legacy Logo

451 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...