1996 Mercury Sable "door lock" Questions

door lock switch in the car. It happens on a random basis. Thanks for any help. some possibilities The power door locks may self-activate or cycle on some vehicles. This may be caused by a misadjusted

door lock switches attached to every door lock inside the door,try lubricating fluid in the lock mechanism first but if it fails you will have to remove each door panel, unplug the door switch jump it

...door lock, driver side only, does not work in my '95 Sable After replacing the inside door handle and door latch (I got the latch from a junk yard), the power door button now does not go down all the ...

door is not in correct position Old locks get worn and will jam over time. Try loosening the screws that hold the lock on and spray the mechanism with WD-40 or other lubricant. If the lock is very old

door then chances are there is a lose wire or connection. Also sometimes the knob can get bent and miss aligned. Simple checks are can you hear the the lock trying to lock when you push the button? Do

...door locks should then cycle from lock to unlock.Remove the paper clip then press one of the buttons on each remote. When you press the button on the remote door locks should cycle again to confirm ...

door with the key get in the car and lock the doors, turn the key on, then off, manually unlock the door, open it exit the car after manually locking the doors. Close the doors... next unlock the door

...Door Lock: When a lock cylinder must be replaced, replace both sides as a set to avoid carrying an extra set of keys. 1. Remove the door trim panel and watershield. 2. Remove the clip attaching the ...

...2) After doors lock then unlock, press any button on the remote being programmed. 3) The doors should lock/unlock to confirm programming. 4) Turn key to OFF and door locks should cycle one last

door locks no working The passenger door power locks will not work. check for power to the door lock actuator if you have power replace the lock actuator