...turn signal switch [unless you replaced the wrong flasher]. CHECK ALL BULBS.IF ALL IS GOOD.CHECK FOR A BAD GROUND.USE A JUMPER WIRE BETWEEN THE GROUND SIDES OF THE TURN SIGNAL BULBS AND A GOOD CHASIS ...
turn signal, dont work, emergeny flahers work turn signal, dont work, emergeny flahers work when you press brakes, tail lights go out and no power to rear lights, replaced switch assembly and fuses ...
...When I use my turn signals the hazard flashers come on instead of the turn signal. Any suggestions? my 98 did about the same thing ended up replacing the turn signal switch on the steeering ...
turn signal my turn signals and hazard light swith wont work U need to replaced the flasher relay.
...turn signal not working.and how do you replace headlight cover .cover is all worn out and is clouding up. Get the Meguire Head Light lens cleaning kit and polish it up Change the turn signal lamp--if ...
...replace. Do the turn signals work? If not it may be the turn signal switch. The aftermarket parts are cheaper than a Ford factory part; check the guarantee before deciding. Worse case scenario? You ...
...... the turn signal multifunction switch is prabably the problem. Very common failure. The fact that you said if you held it in differnet positions and got different results tells me to replace it
...fuses are good. My flashers are good. Could the outtage of my break light be causing my turn signal to become deffective? Replace the signal light switch. Your brake lights are wired into this
turn signal handle goes up and down but signals do not come on in the car or outside and hazard button does nothing also, shecked fuse and it is good replaced it anyhow but still nothing try replacing
...replace the front turn signal bulb located on a 1996 Mercury Grand Marquis? you may be able to access the bulb housing under the hood. open the hood and look behind the turn signal for the bulb ...
858 questions posted
Usually answered in minutes!
661 Questions
611 Questions
488 Questions
496 Questions
384 Questions
