1995 Mercury Villager "control light" Questions

...Some of the national brand auto stores will check codes for free, if there are any. What light's ? headlamps , inside lights ? If headlamps , lighting control module could be the problem ,or switch

...control drops also left rear light goes off and brake light does;nt turn on with brake pressed. Without head lights on every thing is normal. this is either a bad bulb or a bad ground. Change brake ...

...switch inside they do? what am i missing? the daytime running lights or DRL's as we call them are controlled throught the DRL module, replace that

switch located near the brake pedal has gone bad. Any other suggestions? check the brake switch. it controls a brake relay which may have fused contacts. just simply unplug connector from brake switch

control isn't working either. My OD light flashes 16 times when I start the car and my check engine light is on. We are getting error code P0500. We changed the speed sensor and the pigtails and still

...control module has detected a fault, it then disables the system as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the ...

cruise control lights up on dash but does not engage Check for applicable trouble codes, relating to cruise, see if that points us in the right direction? Make sure the brake lites, work. Other than ...

...light (ABS) in front panel control mercury villager 95 a.b.s. is anti-lock braking system.if this light is on the automatic brake pumping system is malfunctioning. you probably have standard brakes, ...

...control? Thanks. I have a 1999 mercury Villager . I was adjusting the brake light switch by the brake pedal and i notice another switch controlled by the foot pedal. What does this switch control? ...

...control the rear motor. First do it with the fan switch turned off. There should be at LEAST one that makes it light. Then turn the switch on. If you still have just the one contact (prong that leads ...