1985 Mercury Grand Marquis "wire starter" Questions

Ad

Question about Mercury Grand Marquis

1 Answer

...starter there only 3. One is your hot wire red color coded black is ground and white the ignition switch. If there is more that it probably add on connection for accessories usually goes to hot wire ...

Ad

Question about Mercury Grand Marquis

3 Answers

...starter signal wire while someone turns key to see if you have power at signal wire. Check all your grounds after that. Still nothing take steering column apart and change ignition switch . Because ...

Ad

Question about Mercury Grand Marquis

1 Answer

...starter has a third wire that's a push-on connection. Remove the wire by gently pulling it off its connection. Remove the top retaining bolt on the starter. It will require the use of a flexible ...

Question about Mercury Grand Marquis

1 Answer

...the answer is no. The Starter is spinning and the Bendix drive is bad. If you have Solenoid wires in addition to the heavy cable at the Starter, you can try to jump the Solenoid under the car ...

Question about Mercury Grand Marquis

1 Answer

...wire from the starter. You may want to mark the connections with a paint pen to help you correctly reconnect the connectors to their proper terminals. To remove the connections, you'll need to use an ...

...Grand Marquis.. Starter wires.. Hot (red) wire from the starter selenoid. Does it track straight to the battery or connect to another spot? The large wire should go from the starter to the

...wire on the starter solenoid that comes from the ignition switch. That wire should have juice only when you turn the key to start, no other time. Supposing both of those do right, that indicates the ...

Question about Mercury Grand Marquis

1 Answer

...the key in crank while you test starter there should be power at the small wire oon starter, if theres power then starter is no good, also try to start in neutral and make sure car is in park

...wire at the starter solenoid, when key is held in crank position.  If no power, diagnose start wire from ignition switch to the starter solenoid.  If power is at the small wire, but no ...

Question about Mercury Grand Marquis

2 Answers

...the wiring from the starter, use your cell phone camera to take a picture before removing the wires take the top and bottom bolts out which hold the starter to the bell housing pull starter out ...

Not finding what you are looking for?
Cars & Trucks Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...