1999 Lexus RX 300 "move reverse drive" Questions

reverse or netral but it will go into drive. does the lever nbot go physically into the position,or does it indicate but not move?check the linkage at the transmission.i would put the unit on a hoist

car won't move when started? Put in reverse and it stalls. Did check transmission oil and it is low Fill up to proper level. If it still doesn't move check drive train.

transmission slip/gear not engaging,for auto transmission. When put in drive car does not advance foward. Moter is running. . will car move when put in 2,3, or reverse?

...Move from Park to Drive or Reverse without the brake being pushed. If that is the case there will be no adjustment. You have a brake switch which is under the brake pedal arm. When you get in a car ...

...reverse and it did not drive, also back into Drive it did not move. I swiched off/on the engine and I was able to drive again for some miles, until again the transmission(?) started vibrating again ...

...reverse? You can move the selector into drive or reverse but the truck wont move? Linkage does moves down to the side of the tranny. Like I said the tranny has never slipped once and runs strong. ...

...reverse it move a little like the parking brake is on but when shift into reverse its a hard **** but doesnt move even when i accelerate in drive or reverse its the same thing Have you checked your ...

move. Why is this happening? When I put my car into Reverse, Netrual and drive the gear shift is getting stiff to move. What's the problem? If you mean the shifter is getting hard to move, its

...Reverse Works Fine?? Will it move forward in manual low? Try unplugging the plug above the vacuum modulator to lock it in 3rd and see if it moves. Either way the transmission will need rebuilt but at ...

move in reverse,,, any info on this drives in forward and in 1st . 2nd. 3rd and drive, put into neutral all good then put into reverse nothing shift into park its good,,,, Sounds like the reverse band