1995 Lexus GS 300 "spark plugs" Questions

spark plugs Expect spark-plug work to be tedious. If this is your first time, plan 3 or 4 hours after engine cools (or 1 hour on several days), allowing 15 minutes per plug. It is harder than changing

...spark plugs are fire i just dont know if is a safety device or if my fuel pump is bad is has been sitting for about a month or two and the battery died i charged it and it still wont start and it ...

...spark plugs, a throttle body gasket, an air filter, an air compressor, a blow gun, a magnetic pick-up tool and a socket set with ratchet and extensions. You must remove the intake air resonator, the ...

Spark plugs I have a 93 Lexus GS 300. The motor was running ruff, so I decided to tune it up and I found oil on the three of the six old plugs. Whats the cause of finding oil on & in the plugs & on ...

...spark plugs If there is massive amount of oil in the spark plugs, will the car not turn over and cause a squeeling sound if you try? you mean oil under plug wires? your plugs are in the center of the ...

...spark plug if no then replace cap and rotor and possibly plugs and wires if that doesn't solve it you may need distributer.if you are getting spark then check if you getting fuel pull off fuel ...

spark plugs on a 2003 lexus gs300 on this particular engine, you are able to get to a couple of the plugs with no trouble. in order to get to the rest u have to remove the intake manifold; not as hard

...pipe fuel shoots from spark plug holes when removed. Check/replace the fuel pressure regulator. Pull all spark plugs out so the excess fuel can evaporate. The pressure regulator should fix this

spark plugs located on my 1995 lexus es300, were are they located? The spark plugs are located right in the centre of the engin you have to take the big air cooler off and some pipes with it to get to

...spark plugs . now car crank but it wont start it feels like it does not have any compression at all When car overheated   the steam heats  the distributor  same time remove distributor ...