1996 Honda Passport "head" Questions

Ad

Question about Honda Passport

1 Answer

...I don't know what else to do. It sounds like it may be a stopped up radiator or a possible blown head gasket. You need to take it to a repair shop and have the radiator flow checked and also check ...

Ad

...the water pump, or thermostat or both? Oil looks good, not milky or brown so I don't think its the head gasket. Ususally when the heater blows hot air only when the car is at hight RPM is because

Ad

...run in this way or the coolant (water) flashes to steam which will cut and pit the cylinders and head. If it is blue smoke it may be several thing (assuming correct bore/piston size. The cylinders ...

Question about Honda Passport

1 Answer

...hose and radiator is cold plus it has an air bubble? what do i do? It sounds like it could be a head gasket or some migration of exhaust gas into your water jackets, do a head gasket leak test

Question about Honda Passport

1 Answer

I'm buying a 1998 passport, and the engine is siezed up, it has a blown head gasket, water has got mixed with the oil. After setting for several months it locked up. I hope to turn the engine over by ...

...it lift up the carpetin boot near the rear crossmember that hatch locks onto you will/may see a head of bolt in a dished hole this bolt head is same size as wheel nuts so use wheel brace and turn ...

...honda passport overheating. We changed the thermostat and radiator. How can I tell if it's the head gasket? If the fan is running and the car is really running hot it is a problem with coolant ...

...Honda Passport? Dimming cable plug removal already resolved. should be the same as an Isuzu...allen head underneath a black plastic sheath on the base or? Good ...

Question about Honda Passport

1 Answer

...out from the back of the motor -why Freeze plugs are round plugs in the cylinder block and cylinder head. they are pressed in not screwed in. The ones in the block are located along the side just ...

...it turns over but sounds like there is no compression. Im sorry to hear that, but your cylinder head was damaged ( cracked or warped, causing the compression to escape) you have to replace the ...

Not finding what you are looking for?
1996 Honda Passport Logo

253 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...