Question about Honda Civic
...HT lead in the distributor cap. If it is on exhaust stroke the rotor button will be 180 degrees from no 1 ht lead . It it is point to no 1 HT lead on compression stroke the truck will start ___IF YOU ...
...HT leads are not touching each other causing spark cross over . Ensure that the coil wires are properly connected . From what you have done, I would revisit everything ( all connections ) to ensure ...
...lead goes from each plug to which ... Makesure the HT leads are on correct, then try them either way. ... As long as 1+4 spark plugs go to one coil pack, then 2+3 go to the other coil ... Fuel light ...
...the carburetor and dies check HT leads firing order as you will probably have 2 wires crossed. ensure that the HT leads do not touch each other. Have a compression test done to check for valve ...
Question about Cars & Trucks
...from the distitor cap to which spark plug friend took off my ht leads like a fool he didnt number or label them and now its running like a mutt plz help!!! Duplicate question. Firing order is ...
Question about Honda Civic
...check the distributor cap and rotor button for shorts /cracks and cleanliness. If you have changed the HT leads then check the firing order . Check the HT lead from the coil to the distributor
Question about Honda Civic
HT Lead connection there is a number presenting the spark plug connection with the cap. if the distributor cap has only the number "1" and not on the other hole for the HT lead connection then you fit
...HT leads are in the right order of if one is damaged? you have several vacuum hoses this is the ideal place to start. In particular there is a approx 15mm o/d hose coming of the inlet manifold check ...
Question about Honda Civic
...order are the ht leads on distributor cap for a carburetor 1.8 1996 golf?? help much appreciated i replaaced the cap but forgot to label the leads and my car is spluttering when engine was fired :( ...
...for the timing is right but it will not start why? if the timing is right and you are getting a spark at the HT leads then I would check the firing order of the HT leads as it may be 180 degrees ...
923 questions posted
Usually answered in minutes!
1,130 Questions
1,041 Questions
758 Questions
811 Questions
722 Questions