88 honda prelude double over head cam timing marks there is a arrow on each cam lets call them north, you will also see marks at east and west to level cams, east and west need to be parallel were the
88 Honda prelude SI wont start? I recently changed the water pump and timing belt, lined up my timing marks as instructed to TDC and put everything back together, no extra bolts. Car will crank all ...
...88%, 2 votes Disconnect the negative cable from your battery so the car doesn't start. Now, since you cannot find the timing mark on the crank, simply remove the #1 sparkplug and insert a long ...
...crank cam timing marks? each gear will have a dimple in them. The cam gear dimple will be at the 6 o'clock position and the crank gear dimple will be at the 12 o'clock position when the gears are ...
I need to know the timing mark on the bottom crank sprocket for an 88 Toyota Celica GT 2. No. 16 valve Same question posted twice?
...88 Suzuki samurai replaced timing belt lined up timing marks replaced stock carb with Weber 32/36 new electric fuel pump and straight inline filter new plugs so here's my problem cranked it ran fine ...
Question about Cars & Trucks
...88 s-10 can you show me with a diagram drawing you did not post an engine size. Typically the timing marks will align at the 12 and 6 o'clock position. The crank mark will be at 12 and the cam mark ...
Question about Honda Accord
...88 how trun the distriutor cap to sitting to time The marks on the crank pulley need to be lined up - then the rotor should point to the number one plug wire, or 180 degrees out. Has the distributor ...
which way do the timing marks point and where are they on the timing gears Here is a picture. The cam gear (top) points down and the Crank gear ( bottom) points up:
344 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions