1986 Honda Accord "anti rattle shims" Questions

anti-rattle springs. Before you install new pads, apply a coat of anti-squeal compound to the backing plates. Smear a little silicon grease on the springs. Install the inner pad (the one with the wear

...brake disk/rotor, or the brake backing plate catching on a spinning rotor ... or a loose/missing anti squeal brake shim (they stop the pads from rattling and vibrating). However, as you say a ...

...anti-rattle spring then remove the 2 brake pads and the 4 anti-squeal shims To Install: CAUTION Only replace brake pads on 1 side of the vehicle at a time. Failure to use this procedure could cause ...

...pedal) brakes squeak at low speed moderate pressure has ceramic pads noise from: anti rattle shims missing Pads worn and low pad warning shim is working master cylinder leak causing brakes to

...anti-rattle clips? Brake anti-rattle clips are used to reduce brake noise and vibration caused by loose-fitting brake pads. Here are the general steps for installing brake anti-rattle clips: Remove ...

anti-rattle springs.Remove the outer brake pad and shim then remove the inner brake pad ans shim(s) 7.Remove and inspect the upper and lower pad retainer clips,the pad retainer clips should fit snugly

...on car and now have loud grinding clunking noise when driving checkfor loose calipers, check the anti- rattle shims fop proper fitting, check shoes for missing retaing springs or if install ...

...apply brakes hard it stops ? check calliper assembly sliding pins they may need lubing with a bit of grease, check for anti rattle shims if there aply a tni film of sylicone on it face and ...

...the rotors at the same time? Did you install new brake hardware--anti-rattle clips and shims? Did you apply brake grease. If not, that's your problem Brakes makes noise Ricks Free Auto Repair ...

...back to that mechanic. I got the "right way" picture from google image search from here... WRONG WAY (my picture) RIGHT