1988 Suzuki Samurai "starter engaging flywheel crank" Questions

starter backs off flywheel and continues to spin Won't start starter is good, fuses good,flywheel good, batterry good,cables good,starter will not continue engagement with flywheel long enough to turn

...starter complete . Flywheel looks like new-worn very little- the new starter is doing the same thing-it will run but will not engage the flywheel-I turned the flywheel some with a screw driver and it ...

...engaging. The starter gear extends on a shaft, then engages the flywheel. It is possible the gear isn't moving forward on the shaft, just spinning w/out engaging, making the rrr sound. So, I would ...

...flywheel Replaced starter have new starter, starter spins but will not engage the flywheel and crank the motor Fixed it get a flywheel shim .0040. For the 2.9.v6 amazing it works like a brand new ...

flywheel creating a problem w/how far the starter can engage?????? Yes it is. As for the starter issue the company/supplier of the crank and flywheel should be able to direct you to the proper starter

starter solenoid not engaging properly.. pushing gear into contact with flywheel. I would recommend replacing the starter and you can replace it with a good mechanical knowledge and DIY. That would be

...bendix is stuck and not engaging the flywheel. Or the starter gear is engaging the flywheel and the overrunning clutch in the starter is bad. Either way, you are looking at a starter

engaging fully. I hope this helps you! sounds like your starter solenoid is bad, it the solenoid that pushes the gear forward for engagement, havn't worked on a lot of fords and may be wrong good luck

2007 Ford fusion flywheel spins but won't crank engine Turn the key and flywheel spins but won't crank engine The3 starter may be spinning and not engaging the flywheel. Bad starter.

...STARTER ENGAGE MY FLYWHEEL DOES'NT TURN ALL THE WAY ON engine crank thrusts worn and crank moved back enough to not engage ,with a manual the clutch would push it forewards.or the flex plate ...